Honeywell Vista Cellular Communicator

The Honeywell LTEM-XV is an AlarmNet Cellular Communicator that works with any Honeywell VISTA System that supports ECP mode. It runs across the Verizon LTE Cat M1 Network and offers fast and reliable service for the connected panel. It retains the same setup as its predecessor, the LTE-XV. When it comes to communication paths for alarm systems, you really cannot go wrong with cellular. It is very dependable, and it is also quite fast. And thanks to the Verizon LTE Cat M1 Network used with the LTEM-XV, performance is boosted even further. You can count on this communicator to keep your Honeywell VISTA Security Panel consistently connected with the Resideo AlarmNet Servers that facilitate alarm monitoring service. Anyone in an area with solid coverage from the Verizon LTE Network can count on the LTEM-XV. Users in rural area without decent coverage may want to consider adding a cellular antenna or a cellular amplifier. By installing and activating the LTEM-XA with a compatible panel, you will be able to start using the Total Connect 2.0 service to control your system remotely. Total Connect 2.0 can be accessed using a web browser or a mobile app on your phone, and it will let you arm and disarm, check system status, control automation devices, and view the live feed for Honeywell IP Cameras. It is truly an outstanding service that you will definitely want to take advantage of, so make sure that it is included in your monitoring plan. There are some firmware requirements for Total Connect 2.0 to keep in mind. For a VISTA-15P or VISTA-20P, the installed PROM Chip must be version 9.12 or higher. We offer PROM Chip upgrades for the 15P and for the 20P if you need one. As for the VISTA TURBO Panels, all VISTA-128BPT Systems can support TC2, and any VISTA-250BPT with a 10.3 PROM Chip or higher is compatible. Unfortunately for VISTA-10P users, that system cannot support TC2 on any firmware version, but the LTEM-XV can still provide the system with basic cellular monitori